Huvitz HSZ-600, Руководство пользователя

Страница: 5 / 29

5
1. Introduction
1-1. Indication for use (Intended use)
This instrument has been designed to be used to observe magnified images of specimens in routine and
research applications. Do not use this instrument for any purpose other than its intended use.
1-2. Classification

Protection against electric shock: Class I

Protection against harmful ingress of water: Ordinary, IPX0

Mode of operation: Continuous

Light Hazard protection Classification: Group 2 by ISO15004-2:2007

Stationary: Do not try to move this equipment without help. This microscope is heavy and should
maintain stationary. Always get two persons to help lift this unit
2. Safety Information
2-1. Introduction
Safety is everyone
’
s responsibility. The safe use of this equipment is largely dependent upon the installer, user,
operator, and maintainer. It is imperative that personnel study and become familiar with this entire manual
before attempting to install, use, clean, service or adjust this equipment and any associated accessories. It is
paramount that the instructions contained in this manual are fully understood and followed to enhance safety
to the patient and the user/operator. It is for this reason that the following safety notices have been placed
appropriately within the text of this manual to highlight safety related information or information requiring
special emphasis. All users, operators, and maintainers must be familiar with and pay particular attention to all
Warnings and Cautions incorporated herein.
“
Warning
”
indicates the presence of a hazard that could result in severe personal injury,
death or substantial property damage if ignored.
To avoid the risk of electric shock, this equipment must only be connected to a supply
mains with protective earth.
Do not position the equipment so that it is difficult to operate the (disconnecting
device).
”
(disconnecting device: power cord, appliance inlet, mains switch, etc.)
The protection provided by the equipment may be impaired if the equipment is used in a
manner not specified by the manufacturer.
”