background image

12    SLIT LAMP HS- 5500------------------- ----------------------------------------------------------------

2.4. Safety Precautions

This  equipment has been developed and tested according to safety standards as  well 

as national and international standards.  This  guarantees a  very high degree of safety 

for  this  device.  The  legislator  expects  us  to  inform  the  user  expressively  about  the 

safety  aspects  in  dealing  with  the  device.  The  correct  handling  of  this  equipment is 

imperative for its safe operation. Therefore, please read carefully all instructions before 

switching  on  this  device.  For  more  detailed  informatio     please  contact  our  Customer 

Service Department or one of our authorized representa  ves.

1.

This equipment must not be used (a) in an area that is in danger of explosions 

and  (b)  in  the  presence  of  flammable,  explosive,  or  vo   tile  solvent  such  as 

alcohol, benzene or similar chemicals.

2.

Do not  put or use  this device in humid rooms. Humidity should  be maintained 

between 30 and 75% for normal operation. Do not expose the device to  water 

splashes, dripping water, or sprayed water. Do not place containers containing 

fluids, liquids, or gases on top of any electrical equipment or devices.

3.

The  equipment  must  be  operated  only  by,  or  under  direct  supervision  of  a 

properly trained and qualified person.

4.

Modifications  of  this  equipment may  only  be  carried  out  by  Huvitz’s  service 

technicians or other authorized persons.

5.

Customer maintenance of this equipment may only be  performed  as stated in 

the  User’s Manual and Service Manual. Any additional  maintenance may only 

be performed by Huvitz’s service technicians or other authorized persons.

6.

The  manufacturer  is  only  responsible  for  effects  on  safety,  reliability,  and 

performance of this equipment when the following requirements are fulfilled: (1) 

The  electrical  installation  in  the  respective  room  corresponds  to  the 

specifications stated in this manual and (2) This equipment is used, operated, 

And maintained according to this manual and Service Manual.

Содержание HS-5500

















































Отзывы: