STRUCTURE SPECIFICATION
MECHANICAL
Dimension
Ø130.8Ⅹ101(H) mm
Weight
Approx. 500g
ENVIRONMENTAL
Ingress Protection
N/A
Operating Temp
-45°C ~ 50°C
Humidity
0% to 90%
FUNCTION
Protocol
PELCO-C
ELECTRONICAL
Supplied Voltage
DC12V±10%orAC24V±10% DualVoltage
Current Consumption
Max.450mA(at12V DC) : LED ON
LED
IR LED 24PCS
Heater
Option
Fan
Option
CERTIFICATION
CE, FCC, ROHS
Yes
1. How to use the jog lever
※All specification is subject to change without notice to improve the quality.
3B26621A
◐ CAMERA / STRUCTURE SPECIFICATION
◐ FUNCTION SETTING
①SET :
Used to access the menu and confirm selection.
②UP, ③DOWN :
Used to move the cursor to up or down.
④ LEFT, ⑤RIGHT :
Used to move the cursor to left or right and change the
value.
⑥EXT-VIDEO :
Extra video output terminal for installation.
Plug your test monitor in hear. The cable is option.
2. OSD menu structure
3. How to control through Pelco-C communication
1) Match the camera with controller's ID, baudrate and protocol
2) Up, Down, Left and right is same as Up, Down, Left and right of
Pelco-C control
3) Enter same as menu key or IRIS open key control
6
1
2
4
3
5
SK-D300IR(D)/HT21AI
VIDEO
Image Sensor
1/2.9" SONY CMOS
Total Pixels
2010(H) 1108(V) = 2,227,080 (pixel)
Active Pixels
1944(H) 1092(V) = 2,122,848 (pixel)
Scanning System
Progressive Scan
Resolution
Digital : 1920X1080p (1080p, 30/25fps)
1280X720p (720p, 60/50fps)
Analog : 700TVL
S/N
More than 50dB (AGC OFF)
Video Output
HD-TVI
Analog : NTSC, PAL(without WDR)
Min.Illumination
Color: 1.0Lux, BW: 0.5Lux
Color DSS: 0.002Lux, BW DSS : 0.001Lux
LENS TYPE
Lens Type
DC Auto Iris
Focal Length
f = 2.8(W) ~ 12.0(T)mm
OPERATIONAL
On screen display
Yes
Day & Night
TDN (Auto / Day / Night)
Brightness
0 ~ 20 steps
Shutter Speed
Auto / Manual (1/30(1/25) ~ 1/60000)
Sens-up
OFF /
×
2~
×
8
AGC
0~20 steps
Backlight
WDR / BLC / OFF
HLC
ON / OFF
D-WDR
ON / OFF
White Balance
Auto / Autoext / Manual
Sharpness
0~10 steps
Digital Noise Reduction (3D)
High/Middle/Low/Off
Digital Zoom
ON/OFF(X1~X8)
Motion Detection
ON / OFF
Privacy Masking
ON / OFF (16 Zone Selectable)
Mirror
H / V / H&V / OFF
Defog
ON / OFF
Function
setting menu
Sub menu
Summary
1.
EXPOSURE
BRIGHTNESS Adjust brightness level 0(dark) ~ 20(bright)
LENS-DC
Select when use of DC Auto-Iris lense/except
the special cases, DC is standard Model
AE MODE
Select AE MODE
SHUTTER
Can be set in AUTO or MANUAL
SENS-UP
Select maximum DSS(Digital Slow Shutter) OFF, x2~X8
AGC
Select Auto Gain Control
2.
WHITE BAL
AWB
Select WHITE BALANCE mode
▷AUTO
Automatically adjusts color according to the lighting
▷AUTO ext
Faster extension version of Auto
MANUAL
Adjust the white balance manually
3.
BACK
LIGHT
BACKLIGH
Select Backlight compenstaion mode
WDR
Adjust WDR level - Low / Middle / High
HLC
Select High Light Compensation.
BLC
▷AREA
Control BLC area according to light condition.
▷POS-X
Adjust the window X- Axis position
▷POS-Y
Adjust the window Y- Axis position
▷SIZ-X
Adjust the window X- Axis size
▷SIZ-Y
Adjust the window Y- Axis size
4.
DAY&
NIGHT
DAY&NIGHT
Select Day&Night mode
AUTO-CDS
Automatic switching between day operation
(colormode) and night operation
(black and white mode)
▷IR-LED
LED On/Off Control
▷ANTI-SAT
Compensate when IR hunting happens.
When you use this function.
▷AGC THRS
Day&Night change level. Higher level make the night
mode changed in lower illumination.
▷AGC
MARGIN
Day to night and night to day switch margin
▷DELAY
2 ~ 60 second
5.
IMAGE
DNR
Select Digital Noise Reduction
SHARPNESS
Adjust sharpness level
COLOR GAIN Adjust Color gain value 0~20 Steps.
GAMMA
Selecte gamma mode. 0.45~0.65
D-WDR
Select Digital WDR(Wide Dynamic Range)
DEFOG
Carry out defog function.
SHADING
Select Lens shading compensation. (OFF / ON)
MIRROR
H-Flip : Flip the picture horizontally on the screen
V-Flip: Flip the picture vertically on the screen
Rotate : Flip the picture horizontally
& vertically on the screen
6.
SPECIAL
TITLE
Camera title edit and display on / off select
PRIVACY
Hide an area you want to hide on the screen
MOTION
When there is movement of the subject on the
screen,there will be motion detection
D-ZOOM
Select digital zoom magnification. Max 8x
Function
setting menu
Sub menu
Summary
6.
SPECIAL
LANGUAGE
Select Language
COMM.
Setup Camera ID and baud-rate.
(Pelco-D/P Auto detect)
7.
SYSTEM
IMAGE
RANGE
Select pedestal level scale
HD Format
Select HD output format. 1080p
HD FPS
Select HD output frame rate.
1080p 30, 25
CVBS
Select CVBS output mode. NTSC or PAL
8. RESET
All the settings will be restored to the factory default
9. EXIT
Escape the menu
