Huvema TL-500-AA, Инструкция по эксплуатации

Страница: 6 / 19

TL - 500 - AA
6
- Cooling agent for sawing.
In order to fill the cooling agent for sawing purposes, you should turn off the operating switch
and fill with PURE CUTTING OIL NOT EMULSIFIABLE IN WATER WITH VISCOSITY OF ISO
VG 10-16.
- Oil atomiser for pneumatic components and filter.
The pneumatic oil tank should be filled by means of a lateral screw on the tank and fill it
with PNEUMATIC OIL OF A VISCOSITY OF ISO VG 16 or similar. Use the same oil for the
lubricating device situated in the group of pneumatic components.
6.- OPERATION INSTRUCTIONS.
- Proper and improper use.
Manual cross-cut saw for cutting aluminium, brass, copper, bronze, etc.
It is prohibited to saw other materials with this machine; if this is done regardless, it may
cause damage to the machine and jeopardise the safety and health of the operator.
We cannot be held liable for damages or accidents associated with improper use of the
machine.
-