Huvema HU 50 G-4 TOPLINE, Инструкция по эксплуатации

Страница: 5 / 24

3. Them to rain. Keep work area well-lighted.
4.
Keep children and visitors away. All children and visitors should be kept a safe distance from work area.
5.
Don’t install & use this machine in explosive, dangerous environment.
3.5 M
aintenance
1. Disconnect machine from power source when making repairs.
2.
Check damaged parts. To read every detail of trouble shooting, repair it very carefully and make sure
the
operator won’t get injured and damage the machine.
4. S
pecifications
Drilling capacity 50 mm
Drilling depth 200 mm
Tapping capacity 33 mm
Spindle taper MT4
Spindle speed range 50-1510 omw/min (6)
Feed range 0.1-0.2-0.3-0.4 mm/omw
Number of feeds 4
Column diameter 180 mm
Distance spindle column 340 mm
T-slots 4
Table dimensions l x w 820x240 mm
Base dimensions l x w 550x1000 mm
Motor power 3 kW
Packaging dimensions l x w x h 1130x740x2210 mm
Weight 750 kg
Voltage 400 V
4.1 T
ools selection
&
proper material range
Tool type Tool material Work piece material
End mill
HSS Non-iron material steel iron
TUNGSTEN CARBIDE Cast iron non-iron material
Face mill TUNGSTEN CARBIDE
Non-iron material steel iron
Light material
Drilling HSS Non-iron material steel iron
Tapping HSS
Non-iron material steel iron
Light material
5. F
eatures
1. This machine has, several uses, such as drilling and can be equipped with an electric switch for tapping.
2.
This machine is of fine quality, can be operated easily, and it is not limited to skilled operators.
3.
The drilling operation can be performed by two methods:
4.
Hand operation, which makes quick drilling.
5.
Worm gear feed operation, which makes slow milling.
6.
Bronze adjustable nuts, which adjust the thread clearance and reduce the wear. They also make screws
rotated smoothly and increase the thread accuracy.
7. Whole column which makes this machine strong, stable, and also keep the high accuracy.
8.
Head of tough cast ensures its accuracy lasting and enduring through the treatment of precise boring
cylinder, grinding, and internal stress relief
5