Huvema HU 270 DHG-4, Руководство пользователя

Страница: 12 / 24

12
BLADE GUIDANCE:
FOR AN ACCURATE GUIDANCE OF THE BAND SAW BLADE THERE ARE TWO RIGID AND PRECISE VERTICAL GUIDE ARMS FITTED
WITH ROLLERS FOR TWISTING AND CARBIDE INSERTED PLATES FOR THE FINAL AND EXACT BLADE GUIDE. ALWAYS PUT THE
BLADE GUIDE ARMS AS CLOSE AS POSSIBLE TO MATERIAL TO BE CUT AND TIGHTEN IT. THE PLAY OF THE BLADE CAN BE RESET BY
ALTERING THE POSITION OF A CARBIDE INSERTED GUIDE PLATE.
SETTING NEW BLADE
-
FIRST OF ALL BOTH GUARD FLAPS AND THE GUARDS WHICH ARE ON THE GUIDE ARMS HAVE TO BE OPEN UPWARDS.
-
LOOSEN THE BLADE BY THE HAND LEVEL SO FAR THAT THE BLADE CAN BE EASILY TAKEN OFF AROUND THE PULLEYS.
-
THE SAME WAY BUT VIC AVERSE, FIT AND TIGHTEN THE NEW BLADE. THERE IS ALSO POSSIBILITY TO TIGHTEN THE
BLADE BY TORQUE METER.
-
ALWAYS PAY ATTENTION TO THE TEETH OF THE BLADE’S DIRECTION IS CORRECT. IF NOT CORRECT IT.
CUTTING SPEEDS
THE MACHINE HAS TWO PRE-SELECTED CUTTING SPEEDS OF 34 AND 68 m/sec. CUTTING SPEEDS HAS TO BE SELECTED
ACCORDING TO THE GRADE AND DIMENSIONS OF THE MATERIAL. IF ANY VIBRATION AND/OR NOISE RISES FROM THE BLADE,
CHANGE THE SPEED.
* ALL THE DETAILS ABOUT THE CUTTING OF VARIOUS MATERIALS AND DIMENSIONS ARE GIVEN BELOW