Huvema HU 16 T, Руководство пользователя

Страница: 11 / 24

11
changes and t yping errors reserved changes and t yping errors reserved changes and t yping errors reserved
• accessories. Use only accessories designed for this drill press to avoid serious injury from thrown broken parts or
work pieces.
• When cutting large diameter holes, clamp the workpiece firmly to the table. Use only one-piece, cup-type, hole
cutters. Keep speed below 1500 rpm when drilling large holes.
• do not use drum sanders in combination with this machine.
• do not install or use any drill that exceeds 7” in length or extends 6” below the chuck jaws. they can suddenly bend
outward or break.
• do not use wire wheels, router bits, shaper cutters, circle fly cutters, rotary planers or any other tools than drills on
this drill press.
• Labels. note and follow the safety warnings, instructions and symbols on the machine.
• spindle speeds. see inside of belt guard for spindle speeds and corresponding placement of belt on pulleys.
• general. safety is a combination of operator common sense and alertness at all times when the drill press is being
used.
attention!
do not allow familiarity (gained from frequent use of your drill press) to become commonplace.
always remember that a careless fraction of a second is sufficient to inflict severe injury.
3. c
onnecTing To The power soUrce
Warning!
the machine must be connected to the power source by a qualified electrician.
check if the electrical specifications of the motor correspond to those of the power source, before you connect the
machine to the mains. Mind the rotational direction of the motor (see arrow).
c
heck The groUnding of The machine
.
in the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to
reduce the risk of electric shock. this tool is equipped with an electrical cord having an equipment grounding
conductor and a grounding plug. the plug must be plugged into a matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
do not modify the plug if it will not fit in the outlet. have the proper outlet installed by a qualified technician.
improper connection of the equipment grounding conductor can result in a risk of electric shock. the conductor
with insulation having an outer surface that is green with or without yellow stripes is the equipment grounding
conductor. if repair or replacement of the electric cord or plug is necessary, do not connect the equipment
grounding conductor to a live terminal.
check with a qualified electrician or serviceman of the grounding instructions are not completely understood, or if in
doubt as to whether the tool is properly grounded..
Use only approved, grounded extension cords.
Warning!
repair or replace damaged or worn cords immediately. this must be carried out by a qualified
technician.