5
CHANGES AND T YPING ERRORS RESERVED
CHANGES AND T YPING ERRORS RESERVED
CHANGES AND T YPING ERRORS RESERVED
4. f
eaTUres
Model
HU 16 Super
Drilling capacity
16 mm
Spindle taper
MT2
Distance column-spindle
180 mm
Drilling depth
80 mm
Speed range
300-2360 rpm (12)
Max. distance spindle-table 510 mm
Column diameter
80 mm
Motor power
0.75 kW
Weight
78 kg
Voltage
230 V
5. i
nsTalling
The
machine
Install the machine on a concrete floor. Consider existing and anticipated needs, the size of material to be processed
through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location
for your machine. See figures below.
1-5
Site Considerations
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and
space for auxiliary stands, work tables or other machinery when establishing a location for your
machine. See
Figure 01
.
for the minimum working clearances of the Model JTD-16series
A
620mm
B
390mm
1-6
Items Needed for Set Up
1.Column and Base
The column must be secured on the base toproperly assemble your drill press.
To secure the column to the base:
1. Place the column on the base and align themounting holes.
2. Secure the column to the base with the fourhex bolts, as shown in
Figure 02
4
Figure 01
Figure 02
4.Slide the arbor into the spindle socket whileslowly rotating the drill chuck. The socket hasa
rectangular pocket where the tang (or flatportion of the arbor shown in
Figure 21
) fitsinto.
5.Seat the chuck with a rubber mallet, as shownin
Figure 22.
1-8.
Setting the machine instruction
:
1.
The machine base with setting hole will be set on concrete floor.
The outlined procedures of setting the machine
MODEL
AREA
SETTED SCREW
JTD-16 series
X=800×600
M10
2
.
The dimension of setting hole:
JTD-16series
10
Figure 21
Figure 22
Wood
Tang-SideUp
X = 800x600 mm
Use M10 set screws
Figure 3
Figure 2
