3
UPON DELIVERY
WEAR EYE PROTECTION
1.
Read manual before proceeding.
2.
Inspect for shipping damage or shortages.
3.
Replace shipping plug with vent cap/dip stick. See page 2
4.
Install the air regulator to the air intake port of the pump.
*Note: the air regulator is preset from the factory*
5.
Select and install the threaded fitting that is compatible with your air
supply fittings. The air supply should be 80 PSI to 100 PSI to obtain the
rated hydraulic output. Air pressure should be regulated to a
maximum of 125 PSI.
6.
Attach the Gun Head hydraulic hose to the pump.
7.
Inspect that the arbor is firmly secured to the gun head.
8.
Plug your air line into the pump. Air pressure should be regulated to a
maximum of 125 PSI.
9.
Depress the foot pedal on the pump. The arbor will move inward.
10.
Release the arbor by rocking the foot pedal forward. The arbor will
extend to its original position.
11.
Your expander is now tested and ready for use. Continue to read page
6 for Operation Use.