HUSTLER TrimStar Скачать руководство пользователя страница 11

125360CE

2-5

REV A

CZ

DA

DE

EN

ES

FR

IT

NL

PT

SV

The mower may not comply with the appropriate 
safety standards if aftermarket parts, accesso-
ries, or attachments are used.

Mower Blade Maintenance Precautions

Never attempt to straighten a bent blade by heating, or 
weld a cracked or broken blade as the blade may break 
and cause serious injury. Replace worn or damaged 
blades.

Never work with blades while engine is running or deck 
clutch switch is engaged (on). 

Always wear adequate eye protection when grinding 
mower blades. 

Mower blades are sharp and can cut. Wrap the 
blade(s) or wear gloves and use extra caution when 
servicing them. 

Battery Service Precautions 

Battery posts, terminals, and related accessories con-
tain lead and lead compounds, chemicals known to the 
State of California to cause cancer and reproductive 
harm. Wash hands after handling.

Charge batteries in a well-ventilated open area, away 
from sparks and flames. Unplug charger before connect-
ing or disconnecting from battery. Wear protective cloth-
ing and use insulated tools. 

Avoid skin and clothing contact with battery acid.

Always wear eye protection when checking the 
battery. Acid can cause serious injury to skin and 
eyes. If contact occurs, flush area with clean 
water and call a physician immediately. Acid will 
also damage clothing.

Do not drink the battery electrolyte.

Do not allow open flame near the battery when 
charging.

Hydrogen gas forms inside the battery. This gas 
is both toxic and flammable and may cause an 
explosion if exposed to flame. Always 

disconnect

the negative (black) battery cable(s) before dis-
connecting the positive (red) cable(s). Always 

connect

 the positive (red) battery cable(s) before 

connecting the negative (black) cable(s).

Do not overfill the battery.

Electrolyte may overflow and damage paint, wir-
ing or structure. When cleaning the battery, use 
soap and water. Be careful not to get soap and 
water into the battery. Clean the battery termi-
nals with a solution of four parts water and one 
part baking soda when they become corroded.

Shorts caused by battery terminals or metal tools 
touching metal mower components can cause sparks. 
Sparks can cause a battery gas explosion which will 
result in personal injury.

Prevent the battery terminals from touching any 
metal mower parts when removing or installing 
the battery.

Do not allow metal tools to short between the 
battery terminals and metal mower parts. 

Incorrect battery cable routing could cause damage to 
the mower and battery cables. This can cause sparks 
which can cause a battery gas explosion which will 
result in personal injury.

Always 

disconnect

 the negative (black) battery 

cable(s) before disconnecting the positive (red) 
cable(s).

Always

 connect 

the positive (red) battery cable(s) 

before connecting the negative (black) cable(s).

Fuel Handling Precautions

To avoid personal injury or property damage, use 
extreme care when handling gasoline. Gasoline is 
extremely flammable and the vapors are explosive.

A fire or explosion from gasoline  can burn you 
and others and can damage property.

Observe the usual gasoline handling precautions:

Do not smoke while refueling. Extinguish all ciga-
rettes, cigars, pipes and other sources of ignition.

• Do not remove fuel cap or fill tank with engine run-

ning or while engine is hot. 

Clean up any gasoline

spills.

If gasoline is spilled, do not attempt to start the 
engine but move the machine away from the area 
of spillage and avoid creating any source of igni-
tion until gasoline vapors have dissipated.

Keep gasoline away from open flame or spark and 
store machine away from open flame or spark or 
pilot light such as on a water heater or appli-
ances.

Refuel outdoors. Never refuel or drain the gaso-
line from the machine indoors.

Never attempt to start the engine when there is a 
strong odor of gasoline  fumes present. Locate 
and correct the cause.

Store gasoline in an approved container and keep 
it out of the reach of children. Never buy more 
than a 30-day supply of gasoline.

Do not fill fuel containers inside a vehicle or on a 
truck or trailer bed with interior carpets or plastic 
truck bed liners. Always place gasoline  contain-
ers on the ground away from your vehicle before 
filling.

When practical, remove the machine from the 
truck or trailer and refuel the machine with its 
wheels on the ground. If this is not possible, then 
refuel such machine on the truck or trailer using a 
portable container and not a fuel dispenser noz-
zle. If a fuel dispenser nozzle must be used, keep 

Содержание TrimStar















































Отзывы: