HUSTLER TrimStar Скачать руководство пользователя страница 10

REV A

2-4

125360CE

CZ

DA

DE

EN

ES

FR

IT

NL

PT

SV

Children or bystanders may be injured if they attempt 
to move or to operate the mower while it is unat-
tended. 

Always stop on level ground.

Disengage the deck clutch.

Place the H-Bar steering in the neutral position.

Move the neutral lock/park brake lever to the 
park brake position.

Stop the engine.

Remove the ignition key.

Wait for the engine and all moving parts to come 
to a complete stop.

Keep children out of the mowing area and under the 
watchful care of a responsible adult other than the 
operator.

Be alert and turn the mower off if children enter the 
area.

Before and while backing, look behind and down for 
small children.

Never carry children, even with the blades off. They 
may fall off and be seriously injured or interfere with 
safe mower operation. Children who have been given 
rides in the past may suddenly appear in the mowing 
area for another ride and be run over or backed over by 
the mower.

Never allow children to operate the mower.

Service Precautions

Unless specifically required, 

DO NOT

 have the engine 

running when servicing or making adjustments to the 
mower. 

Park the mower on level ground.

Disengage the deck clutch.

Place the H-Bar steering in neutral. 

Place the neutral lock/park brake lever in park 
brake position,

Lower the deck.

Stop the engine.

Remove the ignition key.

Remove the spark plug wires from the spark 
plugs.

Wait for all movement to stop before adjusting, 
cleaning or repairing. 

Repairs or maintenance requiring engine power 
should be performed by trained maintenance per-
sonnel only. 

To prevent carbon monoxide poisoning, operate 
the engine in a well ventilated area only. 

Read and observe all safety warnings in this man-
ual.

Before working on or under the deck, make certain the 
engine cannot be accidentally started. 

Always keep belt covers on mower deck for safety as 
well as for cleanliness except when changing or check-
ing the belt.

Use a stick or similar instrument to clean under the 
mower making sure that no part of the body, especially 
arms and hands are under the mower.

Always wear adequate eye protection when:

servicing the hydraulic system.

grinding mower blades and removing accumu-
lated debris. 

Never attempt to make any adjustments or repairs to 
the mower drive system, mower deck or any attach-
ment while the mower engine is running or deck clutch 
is engaged. Repairs or maintenance requiring engine 
power should be performed by trained maintenance 
personnel only.

Never work under the machine or attachment unless it 
is safely supported with jack stands.

Make certain machine is secure when it is raised 
and placed on the jack stands.

The jack stands should not allow the machine to 
move when the engine is running and the drive 
wheels are rotating.

• Use only certified jack stands.

 Use only appropri-

ate jack stands, with a minimum weight rating of 
907 kg to block the unit up.

Use in pairs only. 

Follow the instructions supplied with the jack 
stands.

Exercise caution when releasing spring tension from 
any of the belt idlers or when working with any of the 
deck lift components.

Do not touch hot parts of machine. Be careful of hot 
muffler. Allow engine to cool before servicing.

Keep nuts and bolts tight, especially the blade attach-
ment bolts. Keep equipment in good working condi-
tion.

Never tamper with safety devices. Check their proper 
operation regularly.

Grass collection system components are subject to 
wear, damage and deterioration, which could expose 
moving parts or allow objects to be thrown. Frequently 
check components and replace with manufacturer’s 
recommended parts, when necessary.

Exercise caution when working under the deck as the 
mower blades are extremely sharp. Wrap the blade(s) 
or wear gloves and use extra caution when servicing 
them.

Use original Hustler

®

 replacement parts, or parts that 

are equivalent in overall performance, that are avail-
able from your local Hustler

®

 Dealer.

Содержание TrimStar















































Отзывы: