manualshive.com logo in svg

Hussmann VRM1B, Руководство по установке и эксплуатации

Поделиться
Скачать
Hussmann VRM1B Скачать руководство пользователя страница 13

P/N 3034041_D

 

13

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

VRM Merchandisers

PLUG

The plug cord is 9 ft long and is located on 
the right hand rear of the merchandiser.

 

Disconnect power before servicing. VRM 
merchandisers require a dedicated electrical 
circuit with ground. 12AWG is the minimum 
sized acceptable wire. 

•  The VRM models require a dedicated 

15 AMP/115V circuit with a grounded wall 
receptacle (NEMA 5-15R). 

•  Always use a dedicated circuit with the 

amperage stated on the unit. 

•  Plug into an outlet designed for the plug.

•  Do not overload the circuit.

•  Do not use long or thin extension cords. 

Never use adapters.

•  If in doubt, call an electrician.

VRL-1

VRL-2

VRMB

5-15P

P

6

P

5-     P

— LOCK OUT / TAG OUT —

To avoid serious injury or death from electrical 

shock, always disconnect the electrical power 

at the main disconnect when servicing or 

replacing any electrical component. This 

includes, but is not limited to, such items as 

doors, lights, fans, heaters, and thermostats.

ALWAYS CHECK THE SERIAL PLATE FOR 

COMPONENT AMPERES

Risk of Electric Shock. If cord or plug 

becomes damaged, replace only with a 

cord and plug of the same type. 

Merchandiser must be grounded.

Do not remove the power supply cord ground. 

ELECTRICAL / REFRIGERATION

All Models

Nominal 

Voltage

Minimum 

Voltage

Maximum 

Voltage

120

108

132

Содержание VRM1B















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды