Hussmann ISCGG-D, Инструкция по установке и обслуживанию

Страница: 26 / 33

Page 26
CARE AND CLEANING CONTINUED
CAUTION:
WHEN CLEANING: STORE PERSONNEL SHOULD
•
CONNECT THIS TUBE TO A REMOTE HOSE TO CARRY WATER AWAY.
•
BE SURE TO CRIMP AND RE-INSERT THE TUBE BACK INTO ITS HOLDING CLIPON THE
EVAPORATOR PAN, OR PLACE DRAIN TUBE BACK INTO THE EVAPORATOR PAN
AFTER CLEANING.
The interior bottom of this case is an easy to clean, corrosion resistant material designed for maximum
sanitation. All domestic detergents, even ammonia-based cleaners are recommended. Sanitizing
solutions will not harm the case interior bottom, however, these sanitizers should be used in accordance
with manufacturer’s directions.
To preserve the exterior finish of the fixture, use warm water and a mild detergent.
DO NOT USE ABRASIVE CLEANERS OR STEEL WOOL SCOURING PADS
TO CLEAN THE FIXTURE, AS THESE WILL MARR THE FINISH.
To maintain good refrigeration performance, a refrigeration service person should be called periodically
(at least twice a year) to clean the discharge honeycomb and remove any accumulated dirt from the
condenser coil and condensate evaporator pan on self-contained models.
POOR CIRCULATION OF AIR THROUGH THE CONDENSER COIL
WILL RESULT IN POOR REFRIGERATION PERFORMANCE.
Dirt accumulation inside the condensate evaporator pan will reduce the pan’s capacity and affect the
efficiency of the heater causing a burned out heater and an overflow of defrost water onto the store floor.