Low Temperature
Excel
P/N 0467434_P
1-9
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
JOINING END MERCHANDISER TO
WIDE ISLANDS
NOTE: Merchandisers must be level before
joining.
1. Remove nuts and washers from outside of
end case.
2. Apply gaskets to wide island.
3. Move end as close to the wide island as
possible by using lever bar (mule). Take care
not to damage optional adjustable legs.
4.
Verify upper front panel, front panel,
bumper retainer, and top rail alignment
before
joining cases, and shim cases as necessary.
NOTE:
Merchandiser must be leveled before
joining.
Verify all top rails, panels and
bumper retainers of each merchandiser to be
joined align vertically before joining.
To correct vertical alignment of top rails and
upper front panel, adjust optional legs and, or
shims as necessary.
N
ote
that
aligNmeNt
order
is
differeNt
from
tighteNiNg
order
!
Verify alignment of panels, bumper
retainer and top rail.
Adjust (optional) legs or shim cases to ensure
vertical alignment of panels and top rails.
Install fasteners (parent to end).
Shims
