P/N 558756_C
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
25
EcoVision EZ Door Upgrade
2
Remove screws from top and bottom
of the end. Remove the trim piece and
discard as shown in Fig. 2-1
A.
Install 2 strips of ½ in. gasket to the end as
shown in Fig. 2-2.
B.
Get insulation and hold it up to end. Trace
outline of End and cut insulation to fit opening.
The profile should now look like a rectangular
end as shown in Fig. 2-3
C.
Temporily attach exterior end filler panel
with two #8 screws, insert foam cutout, repeat
for interior end filler panel. The end filler panels
will hold the insulation in place (as shown in Fig.
2-4).
Apply Gasket
Figure 2-1
Figure 2-2
Figure 2-3
Figure 2-4
