Hussmann BEXDW8G, Руководство по установке и эксплуатации

Страница: 15 / 44

BEXDWG
P/N 3093114_A 1-11
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
OFFSETTING BUMPERS
Offsetting the bumper helps to disguise the
joint locations, giving the lineup a smoother
look.
Note: The Excel low
temperature case
BUMPERS ARE
DIRECTIONAL.
Look for an arrow
inside the bumper.
Bumper Removal
Although bumpers can usually be removed by
hand, a simple tool to remove bumpers can
be created by wrapping tape over the claw of
a small pry bar as shown here. The pry bar is
available at most local hardware stores.
Place the padded pry bar below the bumper
as shown below. The tape/padding lessens the
chance of damaging the color panel.
Do not use a screwdriver or other sharp
object, which will damage bumper and color
panel.
Pull
Bumper
Internal
Joint Trim
DO NOT USE SHARP OBJECT
Bumper
Color Panel
Padded Pry Bar