Husqvarna ZTH Скачать руководство пользователя страница 8

Страница: 8 / 60

English-

SAFETY INSTRUCTIONS

Safety Instructions

These instructions are for your safety. Read them carefully.

General Use

•

Read all instructions in this operator’s
manual and on the machine before
starting it. Ensure that you understand
them and then abide by them.

•

Learn how to use the machine and its
controls safely and learn how to stop
quickly. Also learn to recognize the safety
decals.

•

Only allow the machine to be used by
adults who are familiar with its use.

•

Make sure nobody else is in the vicinity
of the machine when you start the
engine, engage the drive, or run the
machine.

•

Make sure animals and people maintain
a safe distance from the machine.

•

Stop the machine if someone enters the
work area.

•

Clear the area of objects such as stones,
toys, steel wire, etc. that may become
caught in the blades and thrown out.

•

Beware of the discharge deck and do not
point it at any one. Do not use the machine
without the discharge deck in place.

•

Stop the engine and prevent it from start-
ing before you clean the discharge deck.

•

Remember that the operator is
responsible for dangers or accidents.

•

Never take passengers. The machine is
only intended for use by one person.

•

Always look down and behind before and
during reversing maneuvers. Keep a look
out for both large and small obstacles.

•

Slow down before turning.

•

Shut down the blades when not mowing.

WARNING!

This symbol means that important safety instructions need to be emphasized. It
concerns your safety.

8011-512

Read the operator’s manual before starting the
machine

8011-513

Clear the area of objects before mowing

8011-520

Never take passengers

Содержание ZTH





























































Результаты поиска

Содержание ZTH

Отзывы:

Похожие инструкции для ZTH

Бренды по названию

Популярные бренды

Husqvarna ZTH, Руководство оператора

Результаты поиска

Содержание ZTH

Отзывы:

Похожие инструкции для ZTH

Бренды по названию

Популярные бренды