background image

9

MAINTENANCE

Check for Loose Fasteners

Clean / Inspect Grass Catcher *

Check Tires

Check Drive Wheels ***

Clean Lawn Mower ****

Clean under Drive Cover ***

Check Drive Belt / Pulleys ***

Check / Sharpen / Replace Blade

Lubrication

Clean and Recharge Battery **

Check Engine Oil level

Change Engine Oil

Clean Air Filter

Inspect Muffler

Replace Spark Plug

Replace Air Filter Paper Cartridge

Empty fuel system or add Stabilizer

BEFORE

EACH

USE

AFTER

EACH

USE

EVERY

10

HOURS

EVERY

25 HOURS

OR SEASON

EVERY

100

HOURS

BEFORE

STORAGE

- Change more often if operating under a heavy load or in high outdoor temperatures.
- Service more often if operating in dirty or dusty conditions.
- Replace blades more often when mowing in sandy soil.
- Charge 48 hours at end of season.
- And after each 5 hours of use.

(if so equipped)

Electric-Start mowers
Power-Propelled mowers
Use a scraper
to clean under deck

*

**

***

****

GENERAL RECOMMENDATIONS

The warranty on this lawn mower does not cover items that 
have been subjected to operator abuse or negligence.  To 
receive full value from the warranty, operator must maintain 
mower as instructed in this manual.

Some adjustments will need to be made periodically to 
properly maintain your unit.

At least once a season, check to see if you should make 
any of the adjustments described in the Service and Ad-
 just ments section of this manual.

•      At least once a year, replace the spark plug, clean or 

replace air fi lter element and check blade for wear.  A 
new spark plug and clean/new air fi lter element assure 
proper air-fuel mixture and help your engine run better 
and last longer.

•      Follow the maintenance schedule in this manual.

BEFORE EACH USE

1.    Check engine oil level.
2.    Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See “LUBRICATION CHART”).

IMPORTANT:   DO NOT OIL OR GREASE PLASTIC WHEEL 
BEARINGS.  VISCOUS LU BRI CANTS WILL ATTRACT DUST 
AND DIRT THAT WILL SHORT EN THE LIFE OF THE SELF-
LU BRI CAT ING BEARINGS.  IF YOU FEEL THEY MUST BE 
LU BRI CATED, USE ONLY A DRY, POW 

DERED GRAPHITE 

TYPE LUBRICANT SPAR INGLY.

 ENGINE OIL

 

 HANDLE BRACK ET MOUNT ING PINS

 REAR DOOR HINGE

 MULCHER 

DOOR

HINGE PIN

 WHEEL 

ADJUSTER 

(ON EACH 

WHEEL)

LUBRICATION CHART

 SPRAY LUBRICANT

 SEE “ENGINE” IN MAINTENANCE SECTION

Содержание XT721F

















Отзывы: