Husqvarna WS 482 HF, Руководство оператора

Страница: 20 / 100

Troubleshooting
Symptom Cause Solution
The blade does not
cut and starts to pol-
ish the diamond
blades.
The cutting depth is too large. Decrease the cutting depth.
The blade speed is too high. Decrease the blade speed.
The water flow to the blade is too high. Decrease the water flow to the blade.
The blade is too hard. Change the blade to a softer blade.
Transportation, storage and disposal
Transportation
• If your product has a transport trolley, use it to move
the product. The handles of the transportation trolley
can be used as runners when you lift it on to a truck.
• Stop the power pack and pull out the electric cable
before you move the equipment.
• Remove the blade and blade guard from the product
before the transportation.
Storage
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Remove the blade and blade guard from the product
after the operation.
• If there is a risk that the water will freeze, the product
must be drained of all remaining water coolant.
Disposal
Symbols on the product or the packaging of the product
indicate that this product cannot be handled as domestic
waste. It must be submitted to an appropriate recycling
station for the recovery of electrical and electronic
equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Technical data
Technical data
Weight
Saw carriage, kg/lbs 3.7/8.2
Saw unit, kg/lbs 28/59.5
Blade guard 800 mm, kg/lbs 13/28.7
Blade guard 1000 mm, kg/lbs 16/35.3
Track 1200 mm (47 in.) kg/lbs 9.5/20.9
Track 2000 mm (79 in.) kg/lbs 19/41.9
20 1675 - 001 - 11.06.2021