Husqvarna TS 60, Руководство оператора, Страница: 6 / 80

6 –
English
MA CHINE´S SAFETY EQ UIPMENT
General
W ARNING! If your machine fails any checks contact your
service agent to get it repaired.
This section describes the machine´s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly.
Blade guar d
The b lade guard is designed to prevent parts of the blade or
cutting fragments from being thrown towards the user.
Chec king the blade guard
• Check that the guard over the blade is not cracked or
damaged in any other way. Replace when damaged.
P ower switch
The po wer switch should be used to start and stop the
machine.
Chec king the power switch
• Push the green button marked "I" to start the machine.
• Push the red button marked "O" to stop the machine.
Check that the motor and the blade stop. Make sure that
the cutting blade can rotate freely until it is completely
stopped.
A defective power switch should be replaced by an authorized
service workshop.
Loc king knob, conveyor cart
The loc king knob is used to lock the conveyor cart in place
when in transit.
W ater pump
!
W ARNING! Never use a machine that has
faulty safety equipment!
!
WARNING! Never use the machine without a
guard nor with a defective guard. Always
check that the guard is correctly fitted before
starting the machine.
It is not permitted to expose the blade more
than 180 degrees without protection.
!
WARNING! Shut down the machine and
disconnect the power plug.
!
WARNING! Submersible water pump. Do not
run dry. For household use only. Must
maintain grounding properly. Risk of electric
shock. This pump has not been investigated
for use in swimming pool areas.
I O