6. Remove the mulch plug in the opposite
sequence.
Maintenance
Introduction
WARNING:
Read and understand
the safety chapter before you do
maintenance on the product.
Maintenance schedule
Maintenance schedule
Before
each
use
At inter-
vals of 8
hours
At inter-
vals of
25
hours
At inter-
vals of
50
hours
At inter-
vals of
100
hours
Each
season
Before
storage
Product Do a check of the brake
function.
X
X
Do a check of tire pres-
sure.
X
X
Do a check of the op-
erator presence control
(OPC).
X
Do a check of the re-
verse operation system
(ROS).
X
Do a check for loose
fasteners.
X
X
X
Examine the blades for
wear and damage.
X
2
Lubricate the product.
Refer to
schedule on page 20
.
X
X
Do a check of the bat-
tery level.
X
Clean the battery and
the terminals.
X
X
Clean pieces off the
steering plate. Refer to
page 21
.
X
Do a check of the trans-
axle cooling fan.
X
Make sure that the cut-
ting deck is level.
X
Do a check of the V-
belts.
X
2
Examine the blades more frequently if you cut where there is sand and soil.
1947 - 005 - 19.10.2022
19
