Husqvarna Supermoto 701 2021 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 278

Husqvarna Supermoto 701 2021 Скачать руководство пользователя страница 80

9 RIDING INSTRUCTIONS

78

–

Always finish braking before you go into a bend. Change down to a lower gear appropriate to your road
speed.

–

Use the braking effect of the engine on long downhill stretches. Change down one or two gears, but do not
over-rev the engine. You will have to apply the brakes far less frequently as a result and the brake system
will not overheat.

9.8

Stopping, parking

Warning

Risk of injury

People who act without authorization endanger themselves and others.

–

Do not leave the vehicle unattended if the engine is running.

–

Protect the vehicle against access by unauthorized persons.

–

Lock the steering and remove the ignition key if you leave the vehicle unattended.

Warning

Danger of burns

Some vehicle components become very hot when the vehicle is operated.

–

Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake sys-
tem before the vehicle parts have cooled down.

–

Let the vehicle parts cool down before you perform any work on the vehicle.

Note

Material damage

The vehicle may be damaged by incorrect procedure when parking.

«
...
78
79
80
81
82
...
»

Содержание Supermoto 701 2021























































































































































































































































































Отзывы:

Нет отзывов