Husqvarna Supermoto 701 2021 Скачать руководство пользователя страница 136

Страница: 136 / 278

13 BRAKE SYSTEM

134

13.1

Anti-lock braking system (ABS)

H01077-10

The ABS module

, consisting of a hydraulic unit, an ABS con-

trol unit, and a return pump, is located under the seat. One wheel
speed sensor

is located in each case on the front and the

rear wheel.

Warning

Danger of accidents

Changes to the vehicle impair the

function of the ABS.

–

Only allow the rear wheel to spin with the front brake
applied if the ABS is switched off (burn out).

–

Do not make any changes to the suspension travel.

–

Only use spare parts on the brake system which have
been approved and recommended by Husqvarna
Motorcycles.

–

Only use tires/wheels approved by Husqvarna Motor-
cycles with the corresponding speed index.

–

Maintain the specified tire pressure.

–

Service work and repairs must be performed profes-
sionally. (Your authorized Husqvarna Motorcycles
workshop will be glad to help.)

Содержание Supermoto 701 2021























































































































































































































































































Результаты поиска

Содержание Supermoto 701 2021

Отзывы:

Husqvarna Supermoto 701 2021, Руководство пользователя, Страница: 136 / 278

Результаты поиска

Содержание Supermoto 701 2021

Отзывы: