Husqvarna Rider 215TX Скачать руководство пользователя страница 10

10 – 

English

SAFETY INSTRUCTIONS

Follow the manufacturer’s recommendations regarding 
wheel weights or counterbalance weights to increase 
machine stability.

Children

Serious accidents may occur if you fail to be on your guard 
for children in the vicinity of the machine. Children are 
often attracted to the machine and mowing. Never 
assume that children will remain where you last saw them.

Keep children away from the area to be mowed and under 
close supervision by another adult.

Keep an eye out and shut off the machine if children enter 
the work area.

Before and during reversing procedures, look behind you 
and down for small children.

Never allow children to ride along. They can fall off and 
seriously injure themselves or be in the way for safe 
manoeuvring of the machine.

Never allow children to operate the machine.

Be particularly careful near corners, bushes, trees or 
other objects that block your view.

Maintenance

Stop the engine. Prevent starting by removing the ignition 
cable from the spark plug or remove the ignition key 
before making any adjustments or carrying out 
maintenance.

Never fill the fuel tank indoors.

Petrol and petrol fumes are poisonous and extremely 
flammable. Be especially careful when handling petrol, as 
carelessness can result in personal injury or fire.

Only store fuel in containers approved for the purpose.

Never remove the fuel cap and fill the fuel tank when the 
engine is running.

Allow the engine to cool before refuelling. Do not smoke. 
Do not fill with fuel in the vicinity of sparks or naked 
flames.

Handle oil, oil filters, fuel and the battery carefully, of 
environmental considerations. Follow the local recycling 
requirements.

Electrical shocks can cause injuries. Do not touch cables 
when the engine is running. Do not test the ignition 
system with your fingers.

If leaks arise in the fuel system, the engine must not be 
started until the problem has been resolved.

Store the machine and fuel in such a way that there is no 
risk that leaking fuel or fumes can cause any damage.

Check the fuel level before each use and leave space for 
the fuel to expand, because the heat from the engine and 
the sun may otherwise cause the fuel to expand and 
overflow.

Avoid overfilling. If you spill petrol on the machine, wipe up 
the spill and wait until it has evaporated before starting the 
engine. If you spill on your clothing, change your clothing.

Allow the machine to cool before performing any actions 
in the engine compartment.

Take care with battery maintenance. Explosive gases 
form in the battery. Never perform maintenance on the 
battery while smoking or in the vicinity of open flames or 
sparks. This can cause the battery to explode and cause 
serious injuries.

Make sure all nuts and bolts are tightened correctly and 
that the equipment is in good condition.

Do not modify safety equipment. Check regularly to be 
sure it works properly. The machine must not be driven if 
protective plates, protective covers, safety switches or 
other protective devices are not fitted or are defective.

Observe the risk of injury caused by moving or hot parts if 
the engine is started with the engine cover open or 
protective cowlings removed.

IMPORTANT INFORMATION

Wheel weights fitted on the rear wheels are recommended 
when driving on slopes for safer steering and improved 
manoeuvrability. Consult your dealer concerning the use of 
wheel weights if you are unsure. Wheel weights can not be 
used on AWD-machines. Use counterweights.

!

WARNING! The engine and the exhaust 
system become very hot during operation. 
Risk of burn injuries if touched. When 
mowing, keep away from bushes and other 
materials in order to avoid a heating effect.

Содержание Rider 215TX

































Отзывы: