Husqvarna QC80, Руководство пользователя

Страница: 4 / 6

B A TTER Y HANDLING
4 – English
• Use the battery charger only when the surrounding
temperature is between 5
°
C and 40
°
C. Use the
charger in an environment which is well ventilated, dry
and free from dust.
Do not use:
• a faulty or damaged battery charger
• the battery in the battery charger outdoors.
Do not charge:
• or never use a faulty, damaged or deformed battery.
• the battery in the rain or in wet conditions.
• the battery in direct sunlight.
Operation
Connect the batter y charger
• Connect the battery charger to the voltage and
frequency specified on the rating plate.
• Use provided cable with specific coil
• Always use residual current device (RCD) when using
battery charger.
• Put the electric plug in a socket-outlet. The LED on the
battery charger flashes green once.
(4)
Connect the batter y to the battery
charger.
The batter y must be charged before using it the first time.
The battery is only 30% charged when delivered.
NOTE!
During charging monitor the charging process.
• Connect the battery to the battery charger. (1), (2)
• The green charging light on the charger is lit when the
battery is connected to the battery charger. The
battery will not be charged if the battery temperature
is over 50
°
C. (4)
• When all LEDs are lit the battery is fully charged. (7)
• When the battery is recharged the battery charger will
stop charging. (switch to stand by). There are no
restrictions on how long a battery can remain in the
charger. Recommended is to remove the battery from
the battery charger when the battery is recharged.
• Pull out the plug. Never jerk the power supply cable to
disconnect it from the wall socket.
(3)
T ransport and storage
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• Store the battery and the battery charger in a dry,
moisture-free and frost-free space.
• Store the battery and the battery charger where the
temperature is between 5
°
C and 45
°
C and never in
direct sunlight.
• Store the battery charger only in an enclosed and dry
space.
• Be sure to store the battery separate from the battery
charger.
Maintenance
Mak e sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
are always clean and dry before the battery is placed in
the battery charger.
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.
F ault codes
T roubleshooting the battery and/or the battery charger
during charging.
(5), (6)
• If the LED on the battery charger is lit solid red, the
battery charger requires a service.
(5)
Disposal of the batter y, battery charger
and machine
Symbols on the product or its pac kaging indicate that this
product cannot be handled as domestic waste. It must
instead be submitted to an appropriate recycling station
for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
!
W ARNING! Do not use the battery
charger close to corrosive or flammable
materials. Do not cover the battery
charger. Pull out the plug to the battery
charger in the event of smoke or fire.
Risk of fire.
!
W ARNING! Risk of electric shock and
short circuiting. Use approved and intact
wall sockets. Make sure that the cable is
not damaged. Replace cable if it appears
to be damaged in any way.
LED display Possible faults Possible action
Error LED
flashing
Temperature
deviation.
Use the battery in
surroundings
where
temperatures are
between -10
°
C
and 40
°
C.
Error LED is lit
Cell difference too
much (1V). Contact your
service agent.