background image

English

 – 9

OPERATING

Protective equipment

General

Do not use the machine unless you are able to call for help in 
the event of an accident.

Personal protective equipment

You must use approved personal protective equipment 
whenever you use the machine. Personal protective 
equipment cannot eliminate the risk of injury but it will reduce 
the degree of injury if an accident does happen. Ask your 
dealer for help in choosing the right equipment.

Always wear:

Protective helmet

Hearing protection

Protective goggles or a visor

Breathing mask

Heavy-duty, firm grip gloves.

Tight-fitting, heavy-duty and comfortable clothing that 
permits full freedom of movement.

Boots with steel toe-caps and non-slip sole.

Be careful as clothing, long hair, and jewellery can get caught 
in moving parts.

Other protective equipment

Fire fighting equipment

Always have a first aid kit nearby.

General safety precautions

This section describes basic safety directions for using the 
machine. This information is never a substitute for 
professional skills and experience.

Please read the operator’s manual carefully and make 
sure you understand the instructions before using the 
machine.

Keep in mind that the operator is responsible for accidents 
or hazards occuring to other people or their property.

All operators shall be trained in the use of the machine. 
The owner is responsible for ensuring that the operators 
receive training.

The machine must be kept clean. Signs and stickers must 
be fully legible. 

Always use common sense

It is not possible to cover every conceivable situation you can 
face. Always exercise care and use your common sense. If 
you get into a situation where you feel unsafe, stop and seek 
expert advice. Contact your dealer, service agent or an 
experienced user. Do not attempt any task that you feel 
unsure of!

!

WARNING! The use of products such as 
cutters, grinders, drills, that sand or form 
material can generate dust and vapours 
which may contain hazardous chemicals. 
Check the nature of the material you intend 
to process and use an appropriate breathing 
mask.

!

WARNING! Long-term exposure to noise can 
result in permanent hearing impairment. So 
always use approved hearing protection. 
Listen out for warning signals or shouts 
when you are wearing hearing protection. 
Always remove your hearing protection as 
soon as the engine stops.

!

WARNING! There is always a risk of crush 
injuries when working with products 
containing moving parts. Wear protective 
gloves to avoid body injuries.

!

WARNING! Sparks may appear and start a 
fire when you work with the machine. Always 
keep fire fighting equipment handy.

!

WARNING! Read all safety warnings and all 
instructions. Failure to follow the warnings 
and instructions may result in electric 
shock, fire and/or serious injury.

!

WARNING! The machine can be a dangerous 
tool if used incorrectly or carelessly, which 
can cause serious or fatal injury to the 
operator or others.

Never allow children or other persons not 
trained in the use of the machine to use or 
service it. Never allow anyone else to use the 
machine without first ensuring that they 
have read and understood the contents of 
the operator’s manual.

Never use the machine if you are fatigued, 
while under the influence of alcohol or 
drugs, medication or anything that could 
affect your vision, alertness, coordination or 
judgement.

!

WARNING! Unauthorized modifications and/
or accessories may lead to serious injury or 
death to the user or others.

Do not modify this product or use it if it 
appears to have been modified by others.

Never use a machine that is faulty. Carry out 
the safety checks, maintenance and service 
instructions described in this manual. Some 
maintenance and service measures must be 
carried out by trained and qualified 
specialists. See instructions under the 
Maintenance heading.

Always use genuine accessories.

Содержание PP518



















Отзывы: