background image

INTRODUCTION

 

Common sense:

The focus of this manual is HOW to operate and service the equipment safely.  
It is not possible to cover every conceivable situation you can face when using this equipment.  Therefore use this 
product only in a manner described in this manual.  Operation or handling the machine in any other manner can 
lead to serious injury or death.
If a situation is not described in this manual it should be considered dangerous - and not be done.

If you are unfamiliar with this product make sure that you carefully understand how it functions and practice all 
operations and handling before putting the machine to use.  Familiarize yourself in the presence of an experienced 
operator.   Avoid all situations that are beyond your capability.   

If you still feel uncertain about the operating procedures after reading these instructions DO NOT operate the 
machine until you have consulted an experienced operator.  

If you have further questions you can contact the closest Husqvarna Construction Products location by writing or 
calling, see information below.  You can also fi nd the closest location by searching the internet at; 

www.husqvarnacp.com 

.  Husqvarna Construction Products will willingly be of service and provide you with advice 

as well as help you to use your product both effi ciently and safely.
Additional manuals are available at NO CHARGE and can also be obtained on the internet site.

 

Husqvarna Construction Products 

 

 

 

17400 West 119

th

 Street

 

Olathe, Kansas  66061

 USA

Toll Free no: 

800 288 5040 

(USA & Canada)

Phone no:   

913 928 1000

Telefax no: 

913 438 7951

Internet Site:  

www.husqvarnacp.com

PERSONAL SAFETY EQUIPMENT

When working and operating the hydraulic power pack the following 

approved personal safety items should be used:

Head 

Protection

Hearing 

Protection

Eye 

Protection

Safety 
Shoes

Protective

Gloves

Careless or improper use of this Power Pack can cause serious or even fatal injury.

Carefully read and understand and follow ALL

 instructions in this manual as well as the instructions in the 

included 

BRIGGS & STRATTON Operator’s Manual

 before using the PP 418 Hydraulic Power Pack.  

Allow only competent adults to operate this power pack.  It is the owner’s responsibility to ensure that all operators 
of this power pack have read and understand the content of this manual.

2

Содержание PP 418





















Отзывы: