Husqvarna MADSAW 525iDEPS, Руководство оператора

Страница: 20 / 92

Maintenance Daily Weekly Monthly
Examine the wear of the chain drive
sprocket.
Replace the chain drive sprocket after approximately
100 hours of operation or more frequently if it is neces-
sary.
To examine the battery and the
battery charger
1. Examine the battery for damages, for
example cracks.
2. Examine the battery charger for damages,
for example cracks.
3. Make sure that the connection cord of the
battery charger is not damaged and that
there are no cracks in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after
use.
2. Clean the battery and battery charger with
a dry cloth. Keep the battery guide tracks
clean.
3. Make sure that the terminals on the battery
and the battery charger are clean before
the battery is put in the battery charger or
the product.
To lubricate the shaft
Lubricate the ends of the drive shaft after
each 30 hours of operation. There is a risk
that the ends of the drive shaft (splined
coupling) wears if they are not lubricated
regularly.
1. Disassemble the shaft. Refer to
To
disassemble the shaft on page 14.
2. Lubricate the end of the drive shaft.
3. Assemble the shaft. Refer to
To assemble
the shaft on page 13.
To apply dielectric grease to the
shaft coupling
Apply dielectric grease to the inner surface of
the shaft coupling and the outer surface of the
shaft after each 30 hours of operation.
1. Disassemble the shaft. Refer to
To
disassemble the shaft on page 14.
2. Apply dielectric grease to the inner surface
of the shaft coupling and the outer surface
of the shaft.
3. Assemble the shaft. Refer to
To assemble
the shaft on page 13.
To check the chain drive sprocket
1. Regularly check the degree of wear on
the drive sprocket. Replace if wear is
excessive.
20 1744 - 004 - 22.03.2022