background image

Maintenance

Introduction

WARNING: Read and understand the safety

chapter before you do maintenance on the

product.

Maintenance schedule

* = General maintenance done by the operator. The

instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.

General product maintenance

Before use,

each 10 h

Weekly,

each 100 h

Make sure that there are no fuel or oil leaks.

*

Clean the product.

X

Make sure that nuts and screws are tightened.

*

Examine the throttle control and choke control for damage.

*

Make sure that the throttle control and the choke control can move smoothly.

*

Lubricate the controls and linkages.

*

Examine the vibration damping units for damage.

X

Examine the tension of the V-belt and look for damages. Adjust or replace the V-belt

as necessary.

X

Engine maintenance

Before use,

each 10 h

After the

first 20 h

Weekly,

each 100 h

Yearly, each

300 h

Do a check of the fuel level and the engine oil level.

X

Clean the cooling fins of the engine.

O

Examine the air filter. Clean the air filter if it is necessary.

X

X

Clean the air filter.

X

Replace the air filter.

X

Replace the engine oil.

X

X

X

Do a check of the engine speed.

O

O

O

Examine and clean the spark plug. Replace the spark

plug if it is necessary.

O

O

Replace the spark plug.

O

Clean the fuel valve of the carburetor.

O

O

Clean the spark arrester screen on the muffler.

O

O

Adjust the valve head clearance for the air intake and the

exhaust valves.

O

Drain the fuel and clean the fuel tank and the fuel filter.

O

O

Clean and adjust the carburetor.

O

10

1096 - 003 - 06.04.2020

Содержание LX 90





















Отзывы: