Husqvarna K970 SmartGuard, Руководство по ремонту, Страница: 21 / 76

5.2.9 To remove the inlet nozzle
1. Remove the screw for the inlet nozzle.
2. Remove the the inlet nozzle.
3. Install in opposite sequence.
5.2.10 To remove the vibration damping units
1. Remove the air filter and the cylinder cover. Refer to
To remove the cylinder cover on page 17.
2. Remove the starter. Refer to
To remove the starter
on page 15.
3. Loosen the cable lug on the ignition module and on
the stop button. Remove the air line. Refer to
To
remove the air duct on page 18.
4. Disconnect the water hose from the valve. Refer to
To disassemble the wet system on page 66.
5. Remove the fuel hose. Refer to
To remove the
carburetor on page 17.
6. Remove the throttle wire from the carburetor. Refer
to
To remove the carburetor on page 17.
7. Remove the choke. Refer to
To remove the
carburetor on page 17.
8. Remove the 4 screws for the vibration damping
units.
1451 - 001 - 02.04.2020 Product overview for repair and
servicing - 21