Husqvarna HP310-1, Руководство оператора

Страница: 224 / 247

To change FM radio station
• Push the rearward button or forward button to
change FM radio station. A beep sound tells you
when you are at minimum or maximum frequency.
To save a FM radio station in a pre-set slot
The FM Radio mode has 5 pre-set slots where you can
save FM radio stations.
1. To change pre-set slot, push and hold the forward
button or rearward button for 1 second. An audio
message tells you about the current pre-set slot.
Refer to the table below.
2. To save current FM radio station, push and hold the
On/Off/Mode button and forward button for 2
seconds.
Note: If you save a FM radio station in a pre-set slot,
it overwrites the FM radio station that was saved
before in that pre-set slot.
3. An audio message tells you when the FM radio
station is saved. Refer to the table below.
4. To save a FM radio station in the next pre-set slot,
push the rearward button or forward button for 1
second. Do the steps above again.
Audio message Information
PRE-SET 1-5
Tells you about the current pre-set
slot.
SAVED
The FM radio station is saved in 1
of the 5 memory slots.
Headset mode
In Headset mode you can connect your product to a
device with Bluetooth
®
wireless technology . The product
has support for A2DP, HFP and HSP. In Headset mode
you can use different streaming functions and accept
phone calls or two-way radio calls.
To do a pairing operation
1. Push and hold the On/Off/Mode button and forward
button for 2 seconds to start the pairing function on
your product.
2. An audio message tells you about the status of the
product. Refer to the table below.
Audio message Information
PAIRING The pairing operation is
started.
3. Start the function for Bluetooth
®
wireless technology
on the device.
4. Select Husqvarna X-COM R in the list of units on
your device.
Note: If it is necessary to enter a password, use
0000.
5. An audio message tells you about the status of the
product. Refer to the table below.
Audio message Information
PAIRING SUCCESS-
FUL
The product is connec-
ted to a device with
Bluetooth
®
wireless
technology
.
Note: A device with Bluetooth
®
wireless technology that
is connected to your product, connects automatically to
your product next time the product is used with the
device. An audio message tells you about the status of
the product. Refer to the table below.
Audio message Information
CONNECTED The product is connected
to a device with Blue-
tooth ® wireless technolo-
gy .
To change audio file during streaming
• Push the rearward button or forward button to
change audio file.
To stop or start an audio file during streaming
• Push the On/Off/Mode button to stop or start an
audio file.
To accept or end a phone call
• Push the Talk button to accept or end a phone call.
Note: New phone calls are identified with a signal. A
phone call overrides FM radio mode and streaming
services.
To use your product with a two-way radio
• Push and hold the Talk button to speak through two-
way radio.
Note: A two-way radio call overrides FM radio mode and
streaming services.
To adjust the volume
1. Push the volume up button or volume down button to
adjust the volume.
2. A beep sound tells you when you are at minimum or
maximum volume.
Note: Each mode, FM radio mode and Headset mode,
and phone calls have one volume range each. This
224 579 - 005 - 05.07.2019