Husqvarna GTH2548XP Скачать руководство пользователя | Manualshive

Страница: 23 / 48

background image

23

SERVICE AND ADJUSTMENTS

FIG. 23

PRI MA RY
IDLER ARM

R.H.
MANDREL

IDLER
PULLEY

ELEC TRIC
CLUTCH
PULLEY

SPRING
ARM

BELT
TENSION ROD
(DIS EN GAGED
POSITION)

RH MAN DREL
COVER

RH
SUSPENSION
ARM

IDLER
PULLEY

TO REPLACE MOWER DRIVE BELT

MOWER DRIVE BELT REMOVAL (See Fig. 23)
• Park tractor on a level surface. En

gage parking

brake.

• Lower mower to its lowest position.
• Disengage belt tention rod from lock bracket.

CAUTION: Rod is spring loaded. Have a
tight grip on rod and release slowly.

• Remove screws from R.H. mandrel cover and remove

cover.

• Remove any dirt or grass clippings which may have

accumulated around mandrels and entire upper deck
surface.

• Disconnect R.H. suspension arm from rear deck bracket

by removing retainer spring.

•      Roll belt over the top of R.H. mandrel pulley carefully.
•      Remove belt from electric clutch pulley.
•      Remove belt from idler pulleys.
•      Check primary idler arm and two idlers to see that they

rotate freely.

• Be sure spring is securely hooked to primary idler arm

and spring arm.

MOWER DRIVE BELT INSTALLATION (See Fig. 23)
•      Install belt in both idlers.
•      Install new belt onto electric clutch pulley.
•         Roll belt into upper groove of R.H. mandrel pulley care-

ful ly.

• Carefully check belt routing making sure belt is in the

grooves correctly.

• Reconnect R.H. suspension arm to rear deck bracket

with retainer spring.

• Reassemble R.H. mandrel cover.
• Engage belt tension rod by pushing rod into locking

bracket.

BOTH FRONT PLATE LINKS MUST BE

EQUAL IN LENGTH

TRUN NION

FRONT PLATE
AS SEM BLY

NUT “C”

NUT “D”

FIG. 22

TO REPLACE MOWER BLADE (SEC OND ARY)
DRIVE BELT (See Fig. 24)

Park the tractor on level surface. En gage parking brake.
• Remove mower (See “TO REMOVE MOWER” in this

section of manual).

• Remove screws from R.H. and L.H. mandrel covers

and re move covers.

REMOVE MOWER DRIVE BELT

(Refer to “TO REMOVE MOWER DRIVE BELT” il lus tra tion
in this section of manual).
•      Carefully roll belt over the top of R.H. mandrel pulley.
•      Remove belt from idler pulleys.
•      Check primary idler arm and two idlers to see that they

rotate freely.

• Be sure spring is securely hooked to primary idler arm

and spring arm.

REMOVE MOWER BLADE (SECONDARY) DRIVE BELT
• Carefully roll belt off L.H. mandrel pulley.
• Remove belt from center mandrel pulley, idler pulley,

and R.H. man drel pulley.

• Remove any dirt or grass which may have ac cu mu lat ed

around mandrels and entire upper deck surface.

• Check secondary idler arm and idler pulley to see that

they rotate freely.

• Be sure spring is hooked in sec ond ary idler arm and

secondary spring arm.

INSTALL NEW MOWER BLADE (SECONDARY) DRIVE
BELT
• Install new belt in lower groove of R.H. mandrel pulley,

idler pulley, and center mandrel pulley as shown.

• Carefully roll belt over L.H. mandrel pulley. Make sure

belt is in all grooves properly.

REINSTALL MOWER DRIVE BELT

(Refer to “TO REMOVE MOWER DRIVE BELT” illustration
in this section of man u al).
• Install belt into upper groove of R.H. mandrel pulley

and around both idlers. Pull belt to front of mower to
remove slack.

«
...
21
22
23
24
25
...
»

Содержание GTH2548XP

















































Отзывы:

Нет отзывов

Похожие инструкции для GTH2548XP

Бренд: Troy Built Страницы: 44

Бренд: CanyCom Страницы: 59

Бренд: Textron Страницы: 26

Бренд: Toro Страницы: 52

Бренд: Gardenline Страницы: 34

Бренд: Snapper Страницы: 32

Бренд: KLIPPO Страницы: 60

Zero Turn Rotary Mower

Бренд: Jacobsen Страницы: 62

Бренд: Craftsman Страницы: 56

Бренд: Snapper Страницы: 15

Бренд: Snapper Страницы: 24

Бренд: Snapper Страницы: 12

Бренд: Snapper Страницы: 52

Бренд: Snapper Страницы: 54

LT115D331B Series

Бренд: Snapper Страницы: 16

LT180H331BV series I

Бренд: Snapper Страницы: 176

Бренд: Snapper Страницы: 24

Бренд: Snapper Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды