To do before the maintenance
• Park the product on a level surface and stop the
engine. Push the machine stop button on the control
panel to prevent accidental start during
maintenance.
• Clean the area around the product from oil and dirt.
Remove unwanted objects.
• Put clear signs around the maintenance area to give
a warning to bystanders that maintenance work is in
progress.
• Keep fire extinguishers, medical supplies and an
emergency phone near.
Maintenance schedule
Note: If more than 1 time interval is identified in a table
row, the shortest time interval is for the first maintenance
only.
Safety devices on the product on page 11
for
instructions.
Maintenance
Daily and
after
transpor-
tation
50 h
100 h
250 h
500 h
Yearly
Clean the product.
X
Do a check of the radiator coolant level.
X
Do a check of the engine oil level.
X
Do a check of the blade guard.
*
Examine all hoses and hose clamps. Look for damage
where the hoses rub against other hoses or parts of the
product.
X
Clean the outer air filter.
X
Do a check of the protective covers and blade guards.
*
Drain water from the gearbox.
X
Do a check of the water supply to the cutting blade.
X
Drain the water separator for the fuel filter.
X
Replace the engine oil and engine oil filter.
X
X
Clean the radiator air filter.
X
Do a check of the V-belts.
X
Lubricate the front wheels.
X
Replace the hydraulic system filter.
X
X
Lubricate the pivot bearings of the front axle.
X
Examine the wheels and wheel hubs for damage and
make sure that they are installed correctly.
X
Examine the air filter hose and hose clamps.
X
Do a check of the hydraulic oil level.
X
Lubricate the blade shaft.
X
Lubricate the pivot on the hydraulic cylinder.
X
Lubricate the rear axle bearing.
X
Replace the hydraulic oil.
X
Replace the oil in the gearbox.
X
28
1223 - 002 - 09.07.2019
Содержание FS7000 D
