27
SERVICE SCHEDULE
208
27.1
Service schedule
Every 30 operating hours - corresponds to about 210 liters of fuel (55.5 US gal)
Every 20 operating hours - corresponds to about 140 liters of fuel (37 US gal)
Every 10 operating hours - corresponds to about 70 liters of fuel (18.5 US gal)/ after every race
Once after 1 operating hour - corresponds to about 7 liters of fuel (1.8 US gal)
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
0
•
I
•
•
Check and charge the battery.
I
I
•
I
•
•
Check the front brake linings. (- p. 109)
I
I
•
I
•
•
Check the rear brake linings. (- p. 114)
I
I
•
I
•
•
Check the brake discs. (- p. 90)
I
I
•
I
•
•
Check the brake lines for damage and leakage.
I
I
•
I
•
•
Check the rear brake fluid level. (- p. 116)
I
I
•
I
•
•
Check the free travel of the foot brake lever. (- p. 116)
I
I
•
I
•
•
Check the frame and swingarm.
I
I
•
I
•
•
Check the swingarm bearing.
I
I
I
•
Check the heim joints at the top of the shock absorber.
I
I
•
I
•
•
Check the shock absorber linkage. (- p. 51)
I
I
•
I
•
•
Conduct a minor fork service. (- p. 16)
I
I
•
I
•
•
Conduct a major fork service. (- p. 15)
I
•
Check the tire condition. (- p. 90)
0
•
I
•
•
Check the tire air pressure. (- p. 90)
0
•
I
•
•
Check the wheel bearing for play.
I
I
•
I
•
•
Check the wheel hubs.
•
I
•
•
Check the rim run-out.
0
•
I
•
•
Check the spoke tension. (- p. 91)
0
•
I
•
•
Check the chain, rear sprocket, engine sprocket, and chain guide. (- p. 98)
•
I
•
•
I
I
Check the chain tension. (- p. 97)
I
o
I
•
I
•
•
Grease all moving parts (e.g., hand lever, chain, ... ) and check for smooth operation.
I
I
•
I
•
•
Check/correct the fluid level of the hydraulic clutch. (- p. 186)
I
I
•
I
•
•
Check the brake fluid level of the front brake. (- p. 111)
I
I
•
I
•
•
Check the free travel of the hand brake lever. (- p. 11 0)
•
I
•
•
Check the steering head bearing play. (- p. 39)
0
•
I
•
•
Check the valve clearance.
0
I
•
Check the clutch.
I
•
Change the engine oil and oil filter and clean the oil screens. (- p. 191)
0
•
I
•
•
Check all hoses (e. g. fuel, cooling, bleeding, drainage) and sleeves for tearing, leaks and incorrect routing.
0
•
I
•
•
Check the antifreeze and coolant level. (- p. 187)
0
•
I
•
•
Check the cables for damage and routing without sharp bends.
•
I
•
•
Check that the cables are undamaged, routed without sharp bends and set correctly.
0
•
I
•
•
Clean the air filter and air filter box. (- p. 77)
•
I
•
•
I
I
Change the glass fiber yarn filling of the main silencer. (- p. 74)
I
•
Check the screws and nuts for tightness.
0
•
I
•
•
Change the fuel screen. (- p. 86)
I
0
I
•
I
•
•
Check the fuel pressure. (- p. 81)
•
I
•
•
Check idle.
0
•
I
•
•
Final check: Check the vehicle for safe operation and take a test ride.
0
•
I
•
•
Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics tool.
0
•
I
•
•
Make the service entry in the
Husqvarna Motorcycles Dealer.net
and in the Service and Warranty Booklet.
0
•
I
•
•
o
One-time interval
