Husqvarna F2203V4, Руководство пользователя

Страница: 80 / 166

12 SERVICE WORK ON THE CHASSIS
78
H03705-11
(EU)
–
Position the horn with the horn bracket.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
F03476-11
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray ( p. 154)
–
Join quick release coupling
4
.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Install the right side cover. ( p. 71)
–
Mount the seat. ( p. 67)
–
Install the air filter box cover. ( p. 68)
12.33 Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 79)