Husqvarna F2101U0, Руководство пользователя

Страница: 102 / 137

14 COOLING SYSTEM
100
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
K01244-11
–
Remove screw
1
. Take off radiator cap
2
.
–
Place an appropriate container under the water pump cover.
–
Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw, water pump
cover M6 10 Nm (7.4 lbf ft)
–
Position the motorcycle upright.
–
Completely fill the radiator with coolant.
Coolant ( p. 126)
S04199-01
–
Loosen screw
3
until coolant escapes without bubbles.
–
Mount and tighten screw
3
.
Guideline
Bleeder screw, cylin-
der head M6 8 Nm (5.9 lbf ft)
S04200-01
–
Mount radiator cap
2
.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the cooling system for leaks.
–
Check the coolant level. ( p. 97)