3. Fold up the storage hatch (C) to open the storage
hatch near the engine.
C
To open the inspection hatches
The product has 1 inspection hatch on each side of the
product.
• Pull out the inspection hatch cover to open the
inspection hatch.
To connect the battery
• Make sure that the wires are firmly connected to the
correct terminals, red (+) first, black (-) second.
Disconnect the battery in reverse order.
• Make sure that the bracket that holds the battery in
place is correctly assembled, so that the battery
can’t move during operation.
To connect and disconnect the propane
tank
CAUTION: Make sure to use the correct
propane tank type. An incorrect propane
tank can cause damage to the product.
Refer to
.
CAUTION: Make sure that the propane tank
is in correct position. Do not use the
propane tank upside down.
If the propane tank is connected and the product is not
in operation, close the propane tank valve.
1. Make sure that the propane tank is tightly held in
position by the lock and the holder plate. The
propane tank cannot move when the propane tank is
correctly installed.
2. Connect the propane hose from the product to the
propane tank.
3. Make sure that the propane hose is correctly
connected to the fuel valve on the engine.
4. Make sure the all couplers are in line. Tighten the
couplers by hand to connect the propane tank to the
product.
CAUTION: Do not use a tool to complete
the connection of the propane tank to the
product. The couplers can be damaged.
5. Turn the propane tank valve counterclockwise until it
stops to start the flow of the propane.
6. Do a soap test on all propane lines. Refer to
examine the propane tank and lines on page 27
.
7. Disconnect in the opposite sequence.
To connect the product to a water hose
Make sure that the water supply is only on during
operation.
18
1268 - 002 - 25.05.2020
