Husqvarna AY 107, Руководство оператора

Страница: 7 / 16

4. Replace the lamella (H), the O-rings (I and K) and
the clamps (C and J).
K
I
J
C
H
5. Lubricate all the parts lightly.
6. Assemble the vibrator head in the opposite
sequence.
7. Tighten the end cap to the correct torque. Refer to
Tightening torque and threadlocker type on page
8
.
Overview (AY 27, AY 37, AY 47, AY 57, AY 67, AY 77, AY 87, AY 107)
A
O
E
G
B
C
D
F
N
H
K
M
I
N
L
To disassemble and assemble the
vibrator head (AY 27, AY 37, AY 47,
AY 57, AY 67, AY 77, AY 87, AY 107)
Refer to Overview (AY 27, AY 37, AY 47, AY 57, AY 67,
AY 77, AY 87, AY 107) on page 7
for the illustration
related to this task.
1. Disconnect the air valve (A) from the hose holder
(B).
2. Cut the clamp (C).
3. Remove the hose (D) from the hose holder (B).
4. Cut the clamp (E) and release the inlet hose (D) from
the hose nipple (G).
1162 - 001 - 26.03.2020 7