Husqvarna AME 1600, Руководство оператора

Страница: 11 / 16

Problem Cause Solution
The power switch
disengages.
There is overload in the vibrator head. Lift the vibrator head from the concrete and
put it in again.
The vibrator head is too hot because the air
intake or air outlet is clogged.
Remove blockage in the air intake or the air
outlet.
The vibrator head is too hot because the
electric motor fan is broken.
Replace the fan at an approved service cen-
ter.
The nuts and bolts that hold the outer casing
are loose.
Tighten the nuts and bolts.
There is too much friction on the flexible
shaft.
Lubricate the inner shaft of the flexible shaft.
There is too much grease on the flexible
shaft.
Do not use more grease than 20 g/m on the
flexible shaft.
The bearings in the vibrator head are worn
out.
Replace the bearings in the vibrator head.
The flexible shaft be-
comes too hot.
There is too much friction on the flexible
shaft.
Lubricate the inner shaft of the flexible shaft.
The product has too
much vibration.
The bearings in the vibrator head are worn
out.
Replace the bearings in the vibrator head.
There is too much friction on the flexible
shaft.
Lubricate the inner shaft of the flexible shaft.
The vibrator head
makes much noise.
The bearings in the vibrator head are worn
out or broken.
Replace the bearings in the vibrator head.
The rotor touches the stator. Let an approved service center replace the
rotor.
The outer casing is broken or has loose
bolts.
Examine the outer casing and tighten the
bolts.
The product starts
but the vibrator head
has no vibration.
The bearings in the vibrator head are broken. Replace the bearings in the in the vibrator
head.
The flexible shaft is broken. Replace the flexible shaft.
Storage and disposal
Storage
• Clean the product before storage.
• Keep the product in a dry and frost-free area.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
Disposal of the product
• Obey the local recycling requirements and applicable
regulations.
• When the product no longer is used, send it to the
dealer or discard it at a recycling location.
1154 - 001 - 05.03.2020 11