Husqvarna 966947005 Скачать руководство пользователя

Страница: 13 / 56

SAFETy

Husqvarna-13

The machine is tested and approved only

•

with the equipment originally provided or

recommended by the manufacturer. only use

approved repair parts for the machine.
The mulch blades should only be used in

•

familiar areas when higher quality mowing is

desired.

Reduce the risk of fire by removing grass,

•

leaves, and other debris that may have

accumulated on the machine. Allow the

machine to cool before putting it in storage.
Regularly clean deck and underside of

•

deck, avoid spraying engine and electrical

components with water.

Transport

The machine is heavy and can cause serious

•

crushing injuries. Be extra cautious when it

is loaded on or unloaded from a vehicle or

trailer.
Use an approved trailer to transport the

•

machine. Activate the parking brake, turn off

the fuel supply, and fasten the machine with

approved fastening devices, such as bands,

chains, or straps, when transporting.

Check and abide by local traffic regulations

•

before transporting the machine on any road.

8011-639

Clean the machine regularly

Содержание 966947005

























































Результаты поиска

Содержание 966947005

Отзывы:

Похожие инструкции для 966947005

Бренды по названию

Популярные бренды

Husqvarna 966947005, Руководство оператора

Результаты поиска

Содержание 966947005

Отзывы:

Похожие инструкции для 966947005

Бренды по названию

Популярные бренды