Husqvarna 966529101, Руководство оператора и каталог запасных частей

Страница: 7 / 20

7
ASSEMBLY
Using four shoulder bolts from the kit hardware, 1.
secure the support assembly to the drawbar
When removing the support assembly—pull
outward on the stop bracket to release it from and
the drawbar and slide support assembly up.
1
BAGGER SUPPORT ASSEMBLY
2
MOUNTING BLOWER ASSEMBLY
Shoulder
Bolts
Support Assembly
Drawbar
8063-069
8063-070
Support
Bracket
Remove the discharge chute from the deck. 1.
Lower deck to the lowest cutting position. 2.
Remove the right hand (discharge side) belt cover 3.
from the deck.
Position blower over the discharge tabs on the
4.
deck and set blower onto the deck.
Be sure the blower is sitting flush against the
5.
outside of the deck.
Install the front mount bracket to the deck with the 6.
pin and hairpin cotter supplied with the kit.
Rear Mount Bracket
Contact Area
8063-072
Outer Pulley
Cover
Pin
Hairpin Cotter
8063-073