Husqvarna 966503901 Скачать руководство пользователя | Manualshive

Страница: 18 / 56

background image

ContRoLs

18

8050-003

Steering controls

Steering Control Levers

The machine’s speed and direction are continuously
variable using the two steering controls. The steering
controls can be moved forward or backward about
a neutral position. Furthermore, there is a neutral
position, which is locked if the steering controls are
moved outward.
When both controls are in the neutral position (N), the
machine stands still.
By moving both controls an equal amount forward
or backward, the machine moves in a straight line
forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the neutral
position. The rotation of the right wheel is reduced and
the machine turns to the right.
Zero turn can be achieved by moving one control
backward (behind the neutral position) and carefully
moving the other steering control forward from its
neutral position. The rotation direction when zero
turning is determined by which steering control is
moved backward behind the neutral position. If the left
steering control is pulled backward, the machine turns
to the left. Use extra care when using this maneuver.
If the steering controls are in uneven positions when
standing still or do not fit in the slots for moving the
controls outward, they can be adjusted.

8050-004

1. Forward
2. Neutral
3. Neutral slot, Neutral lock
4. Reverse

Motion control lever, right side

WARNING!

The machine can turn very rapidly if
one steering control is moved much
further forward than the other.

«
...
16
17
18
19
20
...
»

Содержание 966503901

























































Отзывы:

Нет отзывов

Похожие инструкции для 966503901

Бренд: Harry Страницы: 32

Бренд: Yard-Man Страницы: 11

Бренд: Lastec Страницы: 56

Бренд: Simplicity Страницы: 45

Бренд: Yard-Man Страницы: 12

Бренд: GreenWorks Страницы: 31

Бренд: Wolf Garten Страницы: 14

Бренд: Snapper Страницы: 67

Recycler 119-3320

Бренд: Toro Страницы: 4

Бренд: Meec tools Страницы: 38

Бренд: Cub Cadet Страницы: 20

Бренд: Toro Страницы: 20

Бренд: Toro Страницы: 24

Бренд: Toro Страницы: 32

Wheel Horse 5xi

Бренд: Toro Страницы: 8

Wheel Horse XT Series

Бренд: Toro Страницы: 20

Бренд: Toro Страницы: 44

Wheel Horse XL 440H

Бренд: Toro Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды