Husqvarna 587932801, Руководство оператора

Страница: 8 / 17

ENGLISH
EN
•
Exercise caution around rotating and oscillating tools - maintain a safe distance.
•
Exercise caution with trailing machine parts. Before working on these, wait until they have
completely stopped.
•
There are crushing and shearing points on driven parts.
•
Attached or towed equipment and loads influence handling, steering, braking and stability.
Work at a speed appropriate to the relevant conditions.
•
Unauthorized modifications that jeopardize the operating safety of the machine are prohibited.
•
Before each use, check that the machine is safe to operate.
•
Never remove or modify safety equipment.
•
Never move under an unsecured unit for repairs or inspection.
1.3.2 Working and danger area
•
The user is responsible for third parties in the working area.
•
Standing in the danger area around the machine is prohibited. Ensure that all persons have
left the danger area. Danger area: 10 m radius
•
Before turning on and starting the attachment, check the immediate vicinity. Pay particular
attention to children and animals. Ensure adequate visibility.
•
Before starting work, remove any foreign bodies from the area to be worked. During work, look
out for any further foreign bodies and remove them in good time.
•
When working in enclosed areas, the safety distance from the edge must be maintained to
avoid damage to the machine and tools.
•
When working immediately adjacent to public roads and walkways, where possible drive
across them rather than along them as this minimizes the risk of injury to third parties from
objects being ejected.
•
When working on or immediately adjacent to public roads and spaces, erect information and
warning signs to draw the attention of third parties to the work being carried out.
•
Due to the risk of injury from catapulted objects, protective goggles are mandatory. Approved
protective goggles in this case are those that comply with the ANSI Z87.1 standard for the
USA and/or EN 166 for EU countries.
1.3.3 Before starting work
•
Before starting work, familiarize yourself with all equipment and controls and their function, and
make sure that all safety equipment is properly fitted and in the correct position. Once work
has started it is too late.
•
Before each use, check that the machine is safe to operate.
•
Before each use, check that the drive shaft is securely mounted on the drive drum on the
carrier vehicle and on the attachment.
•
Check the hydraulic connections and hoses for leaks and replace them if necessary.
•
Never operate the machine with defective or missing safety equipment.
8