Husqvarna 570 AutoTune, Руководство оператора, Страница: 39 / 88

English – 39
TECHNICAL DATA
RECOMMENDED CUTTING EQUIPMENT FOR CANADA
The following is a list of recommended cutting equipment for Class 1A and 1B Chainsaws. The combinations of powerhead,
bar and chain meet all requirements outlined in the CSA Z62.1-03 Chainsaws and Z62.3-96 Chainsaw Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding
maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For
guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth
may be considered to have equivalent kickback energy.
A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent or less
kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed bars and chains or ”Type C Low-Kickback Saw Chains” which are
available at your dealer.
Saw chain filing and file gauges
Bar Chain
Length, inch Pitch, inch Gauge, inch Max. nose radius Type Drive link count
16 3/8 0,058
11T
Husqvarna H42,
Husqvarna H48
60
18 3/8 0,058 68
20 3/8 0,058 72
24 3/8 0,058 84
28 3/8 0,058 92
16 3/8 0,050
Husqvarna H46,
Husqvarna H47
60
18 3/8 0,050 68
20 3/8 0,050 72
24 3/8 0,050 84
28 3/8 0,050 93