Husqvarna 55 Rancher Скачать руководство пользователя | Manualshive

Страница: 31 / 44

background image

MAINTENANCE

English

–

31

Checking the brake trigger

Place the chain saw on ﬁrm ground and start it. Make sure
the chain does not touch the ground or any other object.
See the instructions under the heading Start and stop.

Grasp the chain saw ﬁrmly, wrapping your ﬁngers and
thumbs around the handles.

Apply full throttle and activate the chain brake by tilting
your left wrist forward onto the front hand guard. Do not
let go of the front handle.

The chain should stop

immediately.

Throttle lockout

•

Make sure the throttle control is locked at the idle
setting when the throttle lockout is released.

•

Press the throttle lockout and make sure it returns to
its original position when you release it.

•

Check that the throttle control and throttle lockout
move freely and that the return springs work properly.

•

Start the chain saw and apply full throttle. Release the
throttle control and check that the chain stops and
remains stationary. If the chain rotates when the
throttle control is in the idle position you should check
the carburettor idle adjustment.

Chain catcher

Check that the chain catcher is not damaged and is ﬁrmly
attached to the body of the chain saw.

Right hand guard

Check that the right hand guard is not damaged and that
there are no visible defects, such as cracks.

Vibration damping system

Regularly check the vibration damping units for cracks or
deformation.

«
...
29
30
31
32
33
...
»

Содержание 55 Rancher













































Отзывы:

Нет отзывов

Похожие инструкции для 55 Rancher

Бренд: Poulan Pro Страницы: 15

Бренд: Poulan Pro Страницы: 60

Бренд: Yardworks Страницы: 40

Бренд: Hitachi Koki Страницы: 16

Бренд: EGO Страницы: 31

Бренд: Stiga Страницы: 360

Бренд: Partner Страницы: 18

Бренд: STERWINS Страницы: 244

Бренд: STERWINS Страницы: 68

HATCHET M12 FHS

Бренд: Milwaukee Страницы: 260

Бренд: Gardenline Страницы: 72

Бренд: Oleo-Mac Страницы: 60

Бренд: Toyama Страницы: 52

445 EPA II, 445e EPA II, 450e

Бренд: Husqvarna Страницы: 404

Бренд: Husqvarna Страницы: 140

455e-series Rancher TrioBrake

Бренд: Husqvarna Страницы: 36

Бренд: Husqvarna Страницы: 36

Бренд: Husqvarna Страницы: 460

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды