Husqvarna 535RX, Руководство оператора

Страница: 8 / 100

The cutting attachment guard prevents injuries from
objects that eject in the direction of the operator. It
also prevents injuries that occur if you touch the cutting
attachment.
1. Do a visual check for damages, for example cracks.
2. Replace the cutting attachment guard if it is
damaged.
To do a check of the vibration damping system
WARNING:
An incorrectly wound cord
or an incorrect cutting attachment increases
the level of vibration. Refer to
Safety
instructions for operation on page 5
.
The vibration damping system decreases vibration in
the handles to a minimum which makes the operation
easier.
1. Stop the engine.
2. Do a visual check for deformation and damage.
3. Make sure that the vibration damping units are
correctly attached.
To do a check of the quick-release mechanism
WARNING:
Do not use a harness with
a defective quick-release mechanism.
The quick-release mechanism lets the operator remove
the product quickly from the harness if there is an
emergency.
1. Stop the engine.
2. Do a visual check for damage for example, cracks.
3. Release and attach the quick-release mechanism to
make sure that it operates correctly.
To do a check of the muffler
WARNING:
Do not use a product with
a defective muffler.
WARNING:
The muffler becomes very
hot during and after operation and also at
idle speed. Use protective gloves to prevent
burn injuries.
The muffler keeps noise levels to a minimum and points
exhaust fumes away from the operator.
1. Stop the engine.
8 1069 - 008 - 31.10.2022