WORKING TECHNIQUES
20 – English
CAUTION! This technique increases the wear on the
cord.
•
The cord wears quicker and must be fed forward more
often when working against stones, brick, concrete,
metal fences, etc., than when coming into contact with
trees and wooden fences.
•
When trimming and clearing, you should use less than
full throttle (80%) so that the cord lasts longer and to
reduce the wear on the trimmer head.
Cutting
•
The trimmer is ideal for cutting grass that is difficult to
reach using a normal lawn mower. Keep the cord
parallel to the ground when cutting. Avoid pressing the
trimmer head against the ground as this can ruin the
lawn and damage the tool.
•
Do not allow the trimmer head to constantly come into
contact with the ground during normal cutting.
Constant contact of this type can cause damage and
wear to the trimmer head.
Sweeping
•
The fan effect of the rotating cord can be used for
quick and easy clearing up. Hold the cord parallel to
and above the area to be swept and move the tool side
to side.
•
When cutting and sweeping you should use full
throttle to obtain the best results.
IMPORTANT!
To avoid unbalance and vibrations in handles trimmer
head cover need to be cleaned every time cord is
refilled. In addition, check other part of the head if
needed to be cleaned.
H1157511-73,525RS,GBCN.fm Page 20 Wednesday, August 26, 2015 4:03 PM
