Husqvarna 346XP TrioBrake Скачать руководство пользователя | Manualshive

Страница: 33 / 48

background image

MAINTENANCE

English

–

33

When the bar hits the stump the brake should be
activated.

Checking the brake trigger

Place the chain saw on firm ground and start it. Make sure
the chain does not touch the ground or any other object.
See the instructions under the heading Start and stop.

Grasp the chain saw firmly, wrapping your fingers and
thumbs around the handles.

Apply full throttle and activate the chain brake by tilting
your left wrist forward onto the front hand guard. Do not let
go of the front handle.

The chain should stop

immediately.

Throttle trigger lockout

•

Make sure the throttle control is locked at the idle
setting when the throttle lockout is released.

•

Press the throttle lockout and make sure it returns to
its original position when you release it.

•

Check that the throttle trigger and throttle lockout
move freely and that the return springs work properly.

•

Start the chain saw and apply full throttle. Release the
throttle control and check that the chain stops and
remains stationary. If the chain rotates when the
throttle control is in the idle position you should check
the carburetor idle adjustment.

Chain catcher

Check that the chain catcher is not damaged and is firmly
attached to the body of the chain saw.

Right hand guard

Check that the right hand guard is not damaged and that
there are no visible defects, such as cracks.

Vibration damping system

Regularly check the vibration damping units for cracks or
deformation.

Make sure the vibration damping units are securely
attached to the engine unit and handle unit.

«
...
31
32
33
34
35
...
»

Содержание 346XP TrioBrake

















































Отзывы:

Нет отзывов

Похожие инструкции для 346XP TrioBrake

Бренд: Kraissmann Страницы: 28

Бренд: Stihl Страницы: 83

Бренд: Valex Страницы: 28

Бренд: AEG Powertools Страницы: 36

Бренд: Makita Страницы: 36

Бренд: FUXTEC Страницы: 38

Бренд: Draper Страницы: 36

Бренд: Dolmar Страницы: 76

Бренд: Dolmar Страницы: 124

Бренд: Dolmar Страницы: 116

Бренд: GreenWorks Pro Страницы: 41

Бренд: Poulan Pro Страницы: 21

Бренд: Poulan Pro Страницы: 37

Бренд: Poulan Pro Страницы: 17

Бренд: Mac allister Страницы: 63

Бренд: Zenoah Страницы: 16

Бренд: DeWalt Страницы: 56

23av c/c 16" UT10888

Бренд: Homelite Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды