background image

 

4

 

 – 

 

English

 

INTR

 

ODUCTION

 

Dear Customer

 

,

 

Cong

 

ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, 

when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production 
of muskets. The location was logical, since water power was harnessed from the Huskvarna River to create the water-
powered plant. During the more than 300 years of beeing, the Husqvarna factory has produced a lot of different products, 
from wood stoves to modern kitchen appliances, sewing machines, bicycles, motorcycles etc. In 1956, the first motor 
driven lawn mowers appeared, followed by chain saws in 1959, and it is within this area Husqvarna is working today.

Today Husqvarna is one of the leading manufacturers in the world of forest and garden products, with quality as our 
highest priority. The business concept is to develop, manufacture and market motor driven products for forestry and 
gardening as well as for building and construction industry. Husqvarna

 

 

s aim is also to be in the front edge according to 

ergonomics, usability, security and environmental protection. That is the reason why we have developed many different 
features to provide our products within these areas.

We are convinced that you will appreciate with great satisfaction the quality and performance of our product for a very 
long time to come. The purchase of one of our products gives you access to professional help with repairs and service 
whenever this may be necessary. If the retailer who sells your machine is not one of our authorised dealers, ask for the 
address of your nearest service workshop.

It is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think of this 
operator

 

 

s manual as a valuable document. By following its

 

 

 content (using, service, maintenance etc) the life span and 

the second-hand value of the machine can be extended. If you will sell this machine, make sure that the buyer will get 
the operator

 

 

s manual.

Thank you for using a Husqvarna product.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and 
appearance of products without prior notice.

Содержание 327HDA65 X-series





























Отзывы: