Husqvarna 326SX Series, Руководство оператора

Страница: 19 / 24

English
– 19
MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section. The user must only carry out the maintenance and service work described in this manual. More extensive
work must be carried out by an authorised service workshop.
Maintenance
Daily
maintenance Weekly
maintenance Monthly
maintenance
Clean the outside of the machine. X
Make sure the throttle trigger lock and the throttle function correctly from a
safety point of view.
X
Check that the stop switch works correctly. X
Check that the sweeping attachment does not rotate at idle. X
Clean the air fi lter. Replace if necessary. X
Check that the sweeper rolls are undamaged. X
Check the sweeper for cracks and chips or damage. Replace if necessary. X
A non-balanced sweeper induces heavy vibrations that may damage the
machine.
X
Check that nuts and screws are tight. X
Check that there are no fuel leaks from the engine, tank or fuel lines. X
Check the starter and starter cord. X
Check that the vibration damping elements are not damaged. X
Clean the outside of the spark plug. Remove it and check the electrode
gap. Adjust the gap to 0.5 mm (.20”), or replace the spark plug. Check that
the spark plug is
fi tted with a suppressor.
X
Clean the machines cooling system. X
Check that the angle gear is not leaking. X
Clean or replace the spark arrestor mesh on the muf fl er (only applies to
muf fl ers without a catalytic converter).
X
Clean the outside of the carburettor and the space around it. X
Clean the fuel tank. X
Check the fuel fi lter from contamination and the fuel hose from cracks or
other defects. Replace if necessary.
X
Check all cables and connections. X
Check the clutch, clutch springs and the clutch drum for wear. Replace if
necessary by an autorized service workshop.
X
Replace the spark plug. Check that the spark plug is fi tted with a
suppressor.
X
Check and clean the spark arrestor mesh on the muf fl er (only applies to
muf fl ers fi tted with a catalytic converter).
X
Check and if necessary, clean the exhaust port of cylinder from carbon
deposits.
X